Friday, January 25, 2013

Living with Marble Countertops in a BUSY Kitchen

It’s been exactly one year since we remodeled our kitchen.  And yes, I still love it, and no, I wouldn’t change anything. That’s the short answer. Here are some details.

DSC_0464 copy

DSC_0460 copy

What marble lovers really wanna know is—how has life been with your honed Carrera Marble countertops.  Let me preface my worthless opinion by saying that we are a family of five and we cook a lot. Everyday.  I mean, look at the wicked enemies  to marble just blatantly sitting on the counter? A lemon, greasy frosting, and yes, my kids.

DSC_0298

I am to blame as well—rolling out enchiladas with the biggest etching weapon of them all--enchilada sauce splatters.

DSC_0789

I bake bread. I roast chicken. I sauté veggies that splatter grease everywhere. This is a working kitchen for sure that is used, abused, and loved. The photos at the top of the post show the counters still perfect with no signs of marble abuse after one year right? Wrong.

For those of you that don’t know, marble is a bit tricky in the kitchen because it is porous, can stain, and can etch with anything acidic like tomatoes, vinegar, lemon juice, ketchup. So why not get granite which is easy peasy to take care of? Well, there are no white granites (I looked and looked to find an alternative—there is nothing even close to white to satisfy this lover of white stone) so if you want a white natural stone for countertops you are left with marble. Believe it or not, engineered stone like Caesar stone or Silestone is more expensive than Carrera marble. (We spent $3,800 (counters plus install) and I was told to expect to pay at least $1,500 more for Caesar stone) I went into purchasing marble with my eyes wide open. The marble dealer gave me a small slab to take home and abuse. I did so with stainable sauces and foods to make sure I knew what I was getting into.  I decided that any wear and tear on the marble gives it a patina and over time they’ll change even more and I love that.

Forgive me for posting the below photos which are horrifically dark. The only way to show the etching and streaking is to try to photograph the counters with just the glare of the sunlight on them. (I tried using a flash or brightening the photos but that just made the etch marks disappear.)

DSC_0478 copy

DSC_0472

The above photos are of  the island, which has the most marble abuse. However, you can only see those scars when natural light streaming through the windows shines on it.  And yes, I see those marks everyday, but not at night.  I am not a perfectionist so this doesn’t bother me. The photo below, with the circled area, is showing the same section photographed above but with regular light.

DSC_0467

There are no stains on my counters—and in my book, that’s the more important part.  Streaks I can live with, but I don’t want my countertops to have purple and red spots. I’m supposed to seal them every 6 months and I have been naughty and haven’t even done that. (I promise to do it this weekend as I have the sealer finally.)

The below photos show command central. It’s the spot where grease splatters the most next to the burner I use the most. No stains, no problems here. Etching yes, stains no.

DSC_0470DSC_0469DSC_0395 copy

There are however only two things that annoy me about marble that nobody told me about. But because we’re friends, I’ll tell you.

First, there are no antibacterial cleaners that can be used on marble. Nothing that I have found—you can’t use anything with bleach, ammonia, or vinegar to kill nasty raw-chicken germs. I am left with hot soapy water which bugs me because that’s a lot of work. In fact, I don’t think there is a single germ killer out there that can be used on marble. Every cleaner I have encountered can’t be used because it will etch the marble. I really need to do more research on this problem. I made the mistake of using a Lysol antibacterial cleaner on part of the counters when we first had the kitchen and sure enough, it etched the counter—leaving an obvious dull spot that felt ‘rough’ to the touch. That spot has since rubbed out (more on that later.)

Second, the counters are honed, which means they have a matte finish, which I was told would help ease the obviousness of etches, which I think is true, but I also think it makes any oily residue or dirt more visible by showing the dirty/oil and shiny spots on the marble. I wipe the counter day and night to clean them but that does nothing to remove oily looking spots.  I notice the shininess the most when I roll out dough for cinnamon rolls or even regular dough that contains oil/butter.  Using the scrubber side of a kitchen brush with hot water is the best way I know to keep those oily spots to a minimum. But I also have to ‘buff’ the counter every once in a while with a clean kitchen towel to rub out the oily spots. Just like waxing a car—it takes a ton of elbow grease to make the counters look uniformly 'matte’ again. And because I am lazy, and hate buffing anything like nails or shoes, this annoys me. I am almost positive this problem would still exist had I left the counters with a high gloss instead of having them honed. Marble is just finicky.

Lastly, I have etched the counters as is obvious by my photos but weirdly enough, the horrible etches created by Lysol (see above) eventually wear away. I will confess to you my worst sin thus far: We were going on a vacation for a week so I made sandwiches with sliced tomatoes for the long drive. I left that cutting board on the counter, and the tomato juice ran off the cutting board and made a 5-inch scar of etching on to the counters. I gasped when I came home a week later and discovered my stupid, stupid mistake. But within 2 months that spot just rubbed out. I guess because marble is stone it will wear and patina and change along with my messy family. And  that’s why I still love them and would do it all over again.

(To see all the details from our remodel, including sources for cabinets, counters, and wall tall, click here.)

7 comments:

Michael said...

Cynthia, it looks like you might want to take a look at this product for honed marble repairs.
http://aldonchem.com/pr-fine-stone-restoration.htm

Ilene said...

Love your new stools. As someone who is getting a honed marble backsplash installed (eek!) this week, I appreciate this post. I already have looked into marble sealers. I bought sealer for my granite over a year ago. Still haven't done a thing with it. Must actually apply sealer to get the benefits of it. Sheesh, I am lazy.

Heather Lynch said...

Cynthia - love your kitchen and your countertops!! Marble just speaks to my soul but my husband...well...not so much. I've been reading a lot about products that remove etching, etc. Have you tried these and if so how successful were they? Thank you for sharing your experience!!

cynthia said...

Heather, I have not tried any of those repair kits as the etch marks kinda rub out within a few months. I don't mind them much as you only see them in the 'sun glare' as photographed in this post. :)

Mehmet Topcu said...

Great post. Very helpful

Teresa said...

Hi there, would you mind sharing which brand of sealer you chose to go with? We just installed our marble and there are so many options. Yours apparently is working well. :) Thanks.

Cynthia said...

teresa, i just use the Dupont one at Lowes. I rarely ever seal them, I am terrible!

LinkWithin

Related Posts Plugin for WordPress, Blogger...